SMA SUNNY ISLAND 4.4M Operating Manual page 174

15 Decommissioning the Inverter
6. Loosen the screws on both sides between the inverter and the wall
mounting bracket using an Allen key (AF 5).
7. Regarding SI4.4M-13: Remove the inverter by lifting it vertically
up and off the wall mounting bracket. For this, use the side recess
grips. Transport the inverter horizontally.
8. Regarding SI6.0H-13 and SI8.0H-13: Remove the inverter by
lifting it vertically up and off the wall mounting bracket. For this,
use the side recess grips or a steel rod (diameter: maximum
30 mm). Transport the inverter horizontally.
9. Remove the cable glands from the inverter.
10. If the inverter is to be stored or shipped, pack the inverter. Use the original packaging or packaging that is
suitable for the weight and dimensions of the inverter.
11. Dispose of the inverter in accordance with the locally applicable disposal regulations for electronic waste.
174 SI44M-80H-13-BE-en-15
SMA Solar Technology AG
Operating manual