Starting The Generator Without Autostart Function; Stopping The Generator Without Autostart Function - SMA SUNNY ISLAND 4.4M Operating Manual

SMA Solar Technology AG
1. Select Generator > Generator.
2. Set the parameter Automatic generator start to Off.
11.3

Starting the Generator without Autostart Function

1. Start the generator (see manufacturer's manual).
2. Close the load-break switch between the generator and Sunny Island.
☑ After the warm-up period, the Sunny Island connects the stand-alone grid to the generator.
11.4

Stopping the Generator without Autostart Function

1. Stop the generator via the user interface (see Section 11.2, page 124). When you do this, the Sunny Island
disconnects the stand-alone grid from the generator.
2. Open the load-break switch between the generator and the Sunny Island.
3. Stop the generator (see manufacturer's manual).
☑ The generator is stopped. After the power-down time and the minimum stop time, you can use the generator
again.
Operating manual
11 Manually Controlling the Generator
SI44M-80H-13-BE-en-15 125