Toshiba e-STUDIO556 Service Manual page 683

05/08 Mode Element Sub
element
08 Setting System Network Prioritized
Mode authentication server
08 Setting System User
Mode interface
08 Setting System General
Mode
08 Setting System User
Mode interface
08 Setting System User
mode interface
08 Setting System FAX
Mode
e-STUDIO557/657/757/857
Item Subitem Code Sub-
8610
8622
8623
8624
8628
8631
Details Default Acceptable
code value value
Card 0 0-100
Date and time 1
addition setting to file
name of scan to file/e-
mail
0 RIP function setting 1
Switchover of display 3
method of filename
Job operation on the 0
COPY screen when
the coin controller is
connected
Filename creation at 0
fax reception and
forwarding
114
RAM Contents
SYS Sets the prioritized authentication server to be
searched (0 to 100). The servers displayed on the
screen accessed by TopAccess -> Administration ->
Maintenance -> Directory Service are numbered
beginning at the top (0 to 100).
0-1 SYS 0: Not added
1: Added
0-1 SYS Enables/Disables the function related to Excel boarder
rendering of PCL6. The function is to prevent missing
lines when scaling down and inconsistent line width
when scaling up.
0: Disabled (No correction. Compliant with PCL6
language)
1: Enabled
0-3 SYS Switches the display method of filename.
0: Displays the filename from the beginning
1: Displays the trailing characters
2: Displays the beginning and trailing characters
3: Displays the filename without abbreviation
0-1 SYS This setting enables user to move from the COPY
screen to JOB STATUS screen, and then operate jobs
during printing when the coin controller is connected.
This code is valid when the value of 08-9016 is "1".
0: Disabled
1: Enabled
0-1 SYS 0: Use address name (family-name/first-name) as
filename if multiple names are found by address book
search of TSI (sender information).
1: Use address name (family-name/first-name) as
filename only when single name is found by address
book search of TSI (sender information).
Proce Servic
dure e UI
1
1
4
1 Yes
1
1