Toshiba e-STUDIO556 Service Manual page 197

Check item
Setting
[6033]
Card related error: Invalid flag data (no room-entry data)
Classification
MFP access error
Check item
Setting
[6034]
Card related error: Invalid flag data (invalid card data)
Classification
MFP access error
Check item
Setting
[6037] Flags not available
Classification
MFP access error
Check item
Setting
[6041]
Card authentication: Card related error
Classification
MFP access error
Check item
Setting
[6042]
Card authentication: Card setting error
Classification
MFP access error
e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
Use a card with a valid expiration.
The card cannot be used because no room-entry data are recorded
in it.
Use a valid card.
The card cannot be used because the data required for the use of
the card are not correctly set.
Use a valid card.
Card data cannot be obtained correctly.
Reattempt scanning. If the error still occurs after reattempting
scanning for several times, card data may be corrupted or the
card reader may be out of order.
The self-diagnostic code required for card authentication is not set in this
equipment correctly.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 196
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item