Toshiba e-STUDIO556 Service Manual page 356

Sub
05/08 Mode Element
element
08 Setting System User interface Card reader
Mode
08 Setting System User interface Card reader
Mode
e-STUDIO556/656/756/856
Item Subitem Code
3500
3501
Sub- Default Acceptable
Details
code value value
Device setting 0 0-
429496729
Format information 1 0 0-
429496729
13
RAM Contents
SYS To enable the e-Bridge ID Gate, a card reading device
should be set in the order of "ABYYZZZZ". (Enter the
5 corresponding values to "A", "B", "YY" and "ZZZZ".)
- AB: Special setting
- A: Debugging NIC
0: Not used 1: Used
- B: Interface
0: USB connection 1: Serial connection (KP-2003
only)
- YY: Authentication
00: No authentication using card
03: Mifare (KP-2005 only)
04: HID (KP-2004 only)
06: KB Emulation I/F Reader
07: 3Track Magnetic Swipe Reader
09: 2Track Magnetic Swipe Reader
- ZZZZ: Sub-code (Specifies the usage type of card ID)
0000: No authentication using card
0001: IDm (Felica/NFC-Felica) and (or) UID
(Mifare/NFC-Mifare)
0002: Data (Felica/NFC-Felica/Mifare/NFC-Mifare)
0003: SSFC mode
SYS To access the data in the noncontact IC card, the Key
Information "LLLL" and the Sector Number "MMMM"
5 should be set. The "LLLL" should be set first, and then
"MMMM".
<KP-2005>
LLLL: Key information
MMMM: Sector number (hexadecimal number)
Proce Servic
dure e UI
5 Yes
5 Yes