Toshiba e-STUDIO556 Service Manual page 440

Sub
05/08 Mode Element
element
08 Setting System User interface
Mode
08 Setting System User interface
Mode
08 Setting System User interface
Mode
08 Setting System General
Mode
08 Setting System Department
Mode management
08 Setting System Department
Mode management
08 Setting System Password
Mode
08 Setting System User interface Off Device
Mode
08 Setting System User interface
Mode
08 Setting System User interface
Mode
e-STUDIO556/656/756/856
Item Subitem
Customization
Architecture
Sub- Default
Code Details
code value
8922 Email header print 0
setting
8923 Email body print 1
setting
8924 Registration of the 0
received Fax /
Internet Fax / Email
jobs to hold queue
8925 Data tampering 0
checking at startup
8926 Clearing of all -
department counters
8927 Clearing of all user -
counter
8929 Administrator -
password reset
8931 Output Management 1
Service setting
8932 Availability of Netware 2
8933 SSL setting (SSL 2
SMTP Client Off/on)
97
Acceptable
RAM Contents
value
0-1 SYS Sets whether the header of an Email or an Internet Fax
is printed or not as they are received.
0: Not printed
1: Printed
0-1 SYS Sets whether the body of an Email or an Internet Fax is
printed or not as they are received.
0: Not printed
1: Printed
0-1 SYS Registers the received Fax / Internet Fax / Email jobs to
the hold queue instead of printing immediately. Data in
the hold queue are not printed unless the user allows
printing by means of the control panel.
0: Not registered (normal printing)
1: Register
0-1 SYS Sets whether data tampering is checked or not at
startup.
0: Not checked
1: Checked
- SYS In cases when the administrator has prohibited the
clearing of department counter data using code 08-
8921, a service technician can clear the data using this
code.
- SYS In cases when the administrator has prohibited the
clearing of user counter data using code 08-8921, a
service technician can clear the data using this code.
- SYS The default password is set. When "3: High level" is set
for code 08-8911, the default password is set as a
temporary password.
0-1 SYS 0: Disabled
1: Enabled
1-2 NIC 1: Enabled
2: Disabled
1-3 NIC 1: Enabled (accepts all server certificates)
2: Disabled
3: Enabled (uses the imported CA certificate)
Proce Servic
dure e UI
1
1
1
1
3
3
3 Yes
1
12
12