Toshiba e-STUDIO556 Service Manual page 177

Hide thumbs Also See for e-STUDIO556:

[2D68] File sharing service not available

Check if the setting of SMB is valid.

[2D69] NetWare service not available

When a user tried to perform Scan to File with NetWare protocol even though the NetWare setting is

disabled, a message notifies the user that NetWare service is disabled.

Check if the Netware setting is enabled.

[2DC1] Power failure

Check if the power cable is connected properly and it is inserted securely.

Check if the power voltage is unstable.

[2D69] NetWare service not available

Classification

File sharing related error

Replace parts

[2DC1] Power failure

Classification

File sharing related error

Replace parts

[2E10] USB storage system access abnormality

Classification

File sharing related error

e-STUDIO556/656/756/856/557/657/757/857

ERROR CODE AND TROUBLESHOOTING

When a user tried to perform Scan to File with NetWare protocol even

though the NetWare setting is disabled, a message notifies the user that

NetWare service is disabled.

Check if the Netware setting is enabled.

Check if the power cable is connected properly and it is inserted

Check if the power voltage is unstable.

Job status is invalid.

Turn the power OFF and then back ON. Perform the job in error again.

If the error still occurs, check that there is no job, and format the HDD with

[5] + [C] + [POWER].

Show Quick Links