Toshiba e-STUDIO556 Service Manual page 47

[E201] 1st drawer transport jam (paper not reaching intermediate transport sensor)
[E211] 2nd drawer transport jam (paper not reaching intermediate transport sensor)
[E301] 3rd drawer transport jam (paper not reaching intermediate transport sensor)
[E331] 4th drawer transport jam (paper not reaching intermediate transport sensor)
[E3C1] Tandem LCF transport jam (paper not reaching intermediate transport sensor)
[E261] Option LCF transport jam (paper not reaching intermediate transport sensor)
[E2A1] Transport jam during duplex printing (paper not reaching intermediate transport sensor)
Classification
Paper transport jam
Check item
Intermediate transport sensor
(S17)
Transport motor (M17)
1st drawer transport clutch (CLT5)
LGC board
Drive unit, Rollers
Replace parts
Intermediate transport sensor
Transport motor
1st drawer transport clutch
LGC board
Rollers
[E230] 1st drawer transport jam (paper not reaching 1st drawer transport sensor)
Classification
Paper transport jam
Check item
1st drawer transport sensor (S33)
1st drawer transport clutch (CLT5)
LGC board
Drive unit, Rollers
e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
Paper not reaching intermediate transport sensor
• Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[A])
• Connector check
• Harness check.
• Motor check (Perform the output check: 03-133, stop 03-183)
• Connector check
• Harness check.
• Clutch check (Perform the output check: 03-229)
• Connector check
• Harness check.
• Connector check (CN327, CN329)
• Board check.
• Gear check
• Roller check
Paper not reaching 1st drawer transport sensor
• Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[C])
• Connector check
• Harness check.
• Clutch check (Perform the output check: 03-229)
• Connector check
• Harness check.
• Connector check (CN327, CN329)
• Board check.
• Gear check
• Roller check
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 46
Error item
Measures
Remarks
Error item
Measures