Toshiba e-STUDIO556 Service Manual page 50

Replace parts
4th drawer transport sensor
4th drawer transport clutch
LGC board
Rollers
[E3F0] Tandem LCF transport jam (paper not reaching 3rd drawer / Tandem LCF transport
sensor)
Classification
Paper transport jam
Check item
Tandem LCF transport sensor
Tandem LCF transport clutch
(CLT9)
LGC board
Drive unit, Rollers
Replace parts
Tandem LCF transport sensor
Tandem LCF transport clutch
LGC board
Rollers
[E260] Option LCF transport jam (paper not reaching registration sensor)
Classification
Paper transport jam
Check item
Registration sensor (S18)
Intermediate transport sensor
(S17)
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Paper not reaching 3rd drawer / Tandem LCF transport sensor
• Sensor check (Perform the input check: 03-[FAX]OFF/[3]/[C])
• Connector check
• Harness check.
• Clutch check (Perform the output check: 03-231)
• Connector check
• Harness check.
• Connector check (CN350)
• Board check.
• Gear check
• Roller check
Paper which has passed the 1st drawer transport sensor does not reach
the registration sensor during the feeding at the Option LCF.
• Sensor check (Perform the input check: 03-[FAX]ON/[4]/[E])
• Connector check
• Harness check.
• Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[A])
• Connector check
• Harness check.
8 - 49
Remarks
Error item
Measures
Remarks
Error item
Measures
e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8