Toshiba e-STUDIO556 Service Manual page 18

Error code Classification
CF00 Finisher related
service call
CF10
CF70
CF80
F070 Communication
related service call
F090 Circuit related
service call
F100_0 Other service call
F100_1
F100_2
F101_0
F101_1
F101_2
F101_3
F101_4
F101_5
F101_6
F101_7
F101_8
F101_9
F102
F103
F104
F105
F106_0
F106_1
F106_2
F106_3
F106_4
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Contents
Belt escape unit home position error detection: The belt
escape unit does not leave the home position when the
Knurled belt motor has been driven for specified time.
[MJ-1029]
Undefined error code processing: If the engine of the
equipment judges that a code (command) other than the
defined error codes is sent from the finisher, it regards
this as a CF10 error.
New toner transport motor abnormality: The new toner
transport motor does not run normally when new toner is
supplied.
Hopper motor lockup: The hopper motor does not run
normally when the power is ON or the copying is started.
Communication error between System-CPU and Engine-
CPU
SRAM abnormality on SYS board
HDD format error: Operation of HDD key data fails.
HDD format error: Encryption key data of either the SYS
board or the SRAM board are damaged.
HDD format error: Encryption key data of both the SYS
board and the SRAM board are damaged.
HDD connection error (HDD connection cannot be
detected.)
Root partition mount error (HDD formatting fails.): The
HDD cannot be connected (mounted) caused by damage
to the areas in which the program is mainly stored.
Partition mount error: The HDD cannot be connected
(mounted) caused by damage to areas other than those
described in the F101_1 and F101_4 to F101_9 errors.
Partition mount error: The HDD cannot be connected
(mounted) caused by damage to areas other than those
described in the F101_1 and F101_4 to F101_9 errors.
Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the "/work" partition
Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the "/registration"
partition.
Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the "/backup" partition.
Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the "/imagedata"
partition.
Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the "/storage" partition.
Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the "/encryption"
partition.
HDD boot error: HDD does not become ready for booting.
HDD data transfer time-out: Data reading or writing is not
executed in a specified period of time.
HDD data error: Abnormality is detected in the data of the
HDD.
Other HDD errors
ADI-HDD error: Illegal disk replacement detected (ADI-
HDD Exchange to SATA-HDD).
ADI-HDD error: HDD type detection error
ADI-HDD error: ADI encryption key download operation
error
ADI-HDD error: ADI authentication Admin Password
generation error
ADI-HDD error: Authentication random number
generation error
8 - 17
Troubleshooting
P. 8-130
P. 8-130
P. 8-133
P. 8-133
P. 8-106
P. 8-133
P. 8-134
P. 8-134
P. 8-135
P. 8-136
P. 8-136
P. 8-136
P. 8-136
P. 8-137
P. 8-138
P. 8-139
P. 8-140
P. 8-141
P. 8-142
P. 8-143
P. 8-143
P. 8-143
P. 8-143
P. 8-143
P. 8-144
P. 8-144
P. 8-145
P. 8-145
e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8