Sea Recovery SRC Aqua Matic 450-1 Owner's Manual page 102

Aqua Matic 450-1800 Rev. A
5. FRESH WATER FLUSH OPTION SETUP
Inform the Aqua Matic control logic if the Fresh Water Flush Option [49 - 52] is installed or is not installed.
WARNING: The System will perform a Fresh Water Flush automatically each time the System is shut
down. Fresh Water must be available for this cycle, and power must be connected to the System.
1 Screen 2
st
007
Touch the Logo Touch MENU
5 Screen
th
019
Touch DISABLE to inform the control logic that the Fresh Water Flush option is NOT installed or to disable this
feature if it is not desired.
Touch MANUAL to inform the control logic that the Fresh Water Flush option IS installed & you DO NOT wish for the
Fresh Water Flush cycle to perform Automatically. You wish to perform Fresh Water Flushing manually.
Touch AUTO to inform the control logic that the Fresh Water Flush option IS installed and you wish the System to
perform the Fresh Water Flush cycle Automatically each time the System is shut down and every 7 days during
non operation of the Aqua Matic.
Touch CANCEL if the FWF Option SETUP is correct
Touch OK to confirm the change made.
Screen 3 Screen
nd rd
044
Touch SERVICE
MENU
section 3 page 6 of 12
4 Screen
th
008 042
Touch FWF SETUP