KEB Combivert R6-S Instruction Manual page 46

Special adjustments
No. Name
CP.29 Software version
Value range
0.00...9.99
No. Name
CP.30 Software date
Value range
0...6553.5
No. Name
CP.32 Puls off level
Value range
0.0...-1000.0 kW
No. Name
CP.33 Operating mode
This parameter determines the master or slave of regenerative units at parallel connection.
Further it is adjusted whether a harmonic filter or a commutation choke is series-connected.
Single units must be adjusted to master.
Value range
0
1
2
3
4
5
No. Name
CP.34 Regeneration level
Value range
100...120 %
GB - 46
Meaning
Display of the inverter software version number (e.g. 1,11).
Meaning
Display of the inverter software date in the format "ddmm.y".
Standard Meaning
If the adjusted regenerative power is decreased, the COM-
-0.8 kW BIVERT R6-N switches the modulation off after turn-off de-
lay and changes into standby mode (display: "Stb").
Meaning
Master with commutation reactor
Master with harmonic filter
Slave with commutation reactor
Slave with harmonic filter
Master-Slave with commutation reactor input selection
Master-Slave with harmonic filter input selection
Meaning
The feedbacklevel determines the starting value to energy regenera-
tion. The adjusted value refers to the reference value of the DC voltage
in percentage. The status changes from Standby "Stb" to regeneration
"rEGEn".
r/w Enter
yes –
r/w Enter based on
– – In.06
r/w Enter based on
– – In.07
based on
cS.06
r/w Enter based on
yes yes Pn.19
r/w Enter based on
yes – cS.02