Introduction; Preface; Product Description - KEB Combivert R6-S Instruction Manual

1.

Introduction

1.1

Preface

First we would like to welcome you as a customer of the KEB Automation KG and congrat-
ulation to the purchase of this product. You have decided for a product on highest technical
niveau.
The described hardware and software are developments of the KEB Automation KG. The
enclosed documents correspond to the conditions valid at printing. Misprint, mistakes and
technical changes reserved.
The manual must be made accessible for each user. Before working with the unit the user
must become familiar with it. This especially applies to the knowledge and observance of the
following safety and warning indications. The used pictograms have following significance:
Danger
Warning
Caution
Notice
Essential
discharge time
Information
Help
Tip
Non-observance of the safety instructions leads to the loss of any liability claims. This list is
not exhaustive.
1.2

Product description

This instruction manual describes the power supply and regenerative unit KEB COMBIVERT
R6-S. The COMBIVERT R6-S has the following features.
The supply unit
• converts a three-phase input voltage into DC voltage.
• supplies single KEB frequency inverter or via DC interconnection.
• can be parallel connected if higher power supply is required.
• increases the stability of the DC link voltage in the DC interconnection.
The regenerative unit
• feeds back the excess energy from generatoric operation into the supply system.
• reduces the energy demand.
• reduces the heat emission.
• is environmentally friendly and space-saving.
• replaces braking resistor and braking transistor.
Is used, if life or health of the user is in danger or if substan-
tial damage to property can occur.
Is used, if a measure is necessary for the safe and trou-
ble-free operation.
Is used, if a measure simplifies the handling or operation of
the unit.
Introduction
GB - 5