Editing Macros - Kurzweil K2661 Musician's Manual

2. Have a lot of macro files that load similar lists of files.
If the Open button is pressed from a disk function other than Load, you will see the VIEW
MACRO page:
The only function of this dialog is to view the Macro table entries stored in a macro file. This
feature is useful when, for example, you are about to delete a macro file and want to know what
information is contained in the file before you remove it from the disk.

Editing Macros

The RAM Macro table can be edited from the MACRO page. You can select one or more macro
entries and execute any of the following operations on them:
1. Change the Disk ID.
2. Change the bank and mode settings.
3. Delete the selected macro entries.
To edit a macro file already saved on your disk, it is necessary to first load the macro file into the
RAM Macro table:
Making sure that Macro Record mode is enabled, go to the Load function, highlight the macro
file you wish to edit, and then either select certain entries from the macro file (by pressing Open
to get to the LOAD MACRO page), or just press OK to load the entire macro file. When you see
the following display, press the Macro soft button, so that the K2661 will not load the files listed
in the macro.
If you want, you can rebank the macro by scrolling the bank list to something other than
specified. Similarly, if you override the load mode, it also will be reflected in the RAM Macro
table.
To edit entries from the Macro table, return to the MACRO page. For this example we will edit
all the entries at once (like other similar dialogs, if you are concerned with only one list entry, it
Disk Mode
Macros
13-53