Load Function Dialog; Bank Status Indicator; Loading Methods - Kurzweil K2661 Musician's Manual

There must be sufficient sample RAM in the K2661 to load one second of the sound for
auditioning. This amount varies according to the sample rate of the sample, but for most
samples this will be less than 100K bytes. If the auditioned sample does not play, check that
there is enough free sample memory in the K2661. It is also possible to see the following error if
the K2661 object RAM is full or very near full:

Load Function Dialog

Bank Status Indicator

After you have chosen what you wish to load, you are presented with a dialog allowing you to
determine what bank will be used to load the file's data. The bank-status indicator (an asterisk)
indicates whether a bank contains objects.
If an asterisk is present after the bank number (for example, 400...499*), it means that there are
objects in the bank, whether they are RAM or ROM objects. ROM objects are in most banks; the
only completely empty banks are 200 and300.
If there is no asterisk on the line for a bank, it means the bank is empty.
In the following dialog, there are user objects in the 200s and 400s bank, and possibly also in
other banks that become visible when the selection is scrolled.
This indicator makes it easier to find an empty bank to use for loading, if needed.

Loading Methods

Once you have pressed OK to decide on what bank to use, you will see this dialog if the bank is
empty:
Disk Mode
Load Function Dialog
13-19