Importing Studios From Another Program Or Setup; Using Kdfx Live From The K2661 Keyboard - Kurzweil K2661 Musician's Manual

Importing Studios From Another Program or Setup

If you have a killer studio with FXMods set up in one program (or setup) and you want to use
the same studio and FXMods in a different program, you don't have to rebuild the studio by
hand: you can copy studios between programs or setups in one operation.
Press the ImpFX soft button, and you'll see this:
Use the soft buttons at the left to select either a program or a setup as the source for the studio
and FXMods you are importing. Select the number of the program or setup you want to import
from. As you change the program or setup, the studio associated with each program or setup
will display in parentheses below the program or setup.
The studio will also kick in, so you can hear it affecting the program you're listening to.
When you've chosen a program or setup to import a studio from, press the Import soft button.
"KDFX from...imported" will flash on the screen, and you will be returned to the Program
Editor of the program or setup you are working on.
Studios from setups can be imported into programs without restriction, and vice versa.
FXMods on Imported Studios
If you have imported a studio into a program, the FXMods that were in the program you've
imported into are now all gone. They are replaced with the FXMods associated with the program
you imported from. It doesn't matter if there were more FXMods in the old program than in the
new—even if the new program has zero FXMods, the old ones are all erased.

Using KDFX Live From the K2661 Keyboard

The sliders and wheels on the K2661 keyboard, and the pedals connected to the keyboard, can
be extremely useful with KDFX, if you assign FXMods to the K2661's controllers. The ribbon, for
example, can be used in a "Pitcher" FX preset to change the pitch of the signal, while sliders and
pedals can be used to control reverb time, flanger feedback, EQ, or any of the myriad parameters
available in KDFX.
KDFX in Setup Mode
To use KDFX with a setup, make sure that FX Mode (on the Effect-mode page) is set to Setup or
Auto.
Like programs, every setup has a set of FXMod routings associated with it. These are identical to
the routings available in programs: there are four FXMod pages, three dedicated FX function
pages, and an Import FX page. The procedure for setting up the routings is the same as in a
program. KDFX settings can be imported into a setup from either another setup or a program.
Advanced KDFX
Real-time Control of KDFX
15-27