Soft Buttons On The Event Page - Kurzweil K2661 Musician's Manual

Table 12-2 lists the ranges of the editable event values.
MIDI Events
MIDI Note Events
MIDI Controller Events
Table 12-2

Soft Buttons on the EVENT Page

Cut: Removes the currently selected event from the Event list and temporarily stores it in a
memory buffer so that you can immediately paste it into a new location.
Copy: Makes a duplicate of the currently selected event and temporarily stores it in a memory
buffer so that you can immediately paste it into a new location.
Paste: Inserts the most recent cut or copied event into the Event list at the currently selected
Bar: Beat: Tick location. The pasted event will share the same location with the event that
already existed at that location in the Event list, but it will appear before the pre-existing event.
View: Brings you to the View page where you can set the view filter parameters for the Event
list.
The PCHG, BEND, MPRS, SYSX, TMPO, and END events will show their
values in the display region directly to the right of the Event Type region. All
of their values can be edited. Here are the ranges of values for each event
type:
Program Change (PCHG)
Pitch Bend (BEND)
Mono Pressure (MPRS)
System Exclusive (SYSX)
Tempo (TMPO)
End Point (END)
Note events have four editable values: Note Number, Attack Velocity
(indicated by a "v"), Release Velocity (indicated by a "^"), and Note
Duration.
Note Number
Attack Velocity
Release Velocity
Note Duration
Controller events have two editable values: Controller Type and Controller
Value. Defined controllers are referred to by their names.
Controller Type
Controller Value
MIDI-event Value Ranges
Song Mode and the Song Editor
Song Editor: The EVENT Page
0–127
-8192–8191
0–127
The message in hexadecimal form
1.00–255.00 bpm
Any Bar: Beat: Tick setting
C-1 – G9
v1 - v127
^1 - ^127
Beats: Ticks
0 - 127
0 - 127
12-47