Kurzweil K2661 Musician's Manual page 448

Advanced KDFX
Navigating KDFX
Input
From the FXBUS page, or anywhere inside the Studio Editor, pressing the INPUT soft button
brings you to the Input A page.
The other Input pages—B, C, and D—are selected by using the Chan/Bank Up and Down
buttons. Depending on how the inputs are configured—stereo or mono—there will be from four
to eight Input pages.
Similar to the FXBUS pages, the first time you look at an input page after entering the Studio
Editor, it will be the Input A page (or, if it's mono, the Input A/L page). Once you are in the
Studio Editor, when you press the INPUT soft button from another page, it will take you to
whichever input page you were last looking at.
Aux FX
From inside the Studio Editor, a soft button accesses the AUXFX page. This is a separate effects
bus, which can be used by itself, or in a chain following one or more of the FXBuses.
Like the FXBuses, you can view and edit the FX preset's parameters, including its algorithm, by
highlighting the FX preset's name and pressing Edit. As on the insert FXBuses, the FX preset on
the Aux bus has up to four pages of parameters, and the <more> soft buttons access Name,
Save, Delete, and Dump pages for the FX preset. The same FX preset can be used in the Aux bus
as in any of the insert FXBuses.
The AUXFX page can also be accessed from any of the FXBUS pages by placing the cursor on the
box labelled Aux and pressing Edit.
Pressing Exit goes back to the AUXFX page on the EditStudio level. If you have made any
changes in the FX preset, you will be prompted to save the FX preset.
15-4