Kurzweil K2661 Musician's Manual page 195

These overrides (that is, which parameters are available, and their values) are stored as part of
the studio, not as part of the FX preset, and therefore you don't have to create new FX presets
just because you want to change a couple of parameters. There are two bus overrides available
for each of the four insert FXBuses and the Aux bus.
If you don't want any parameter control on this page, select the parameter's names, then scroll
the Alpha wheel until you see None.
FXBus2
Press the Chan/Bank Up button to get to FXBus2:
qWWWWT
!k ©!!!!!!!!!!!!!!!!!!!!!!!!!!!h
CVVVVB
On this bus is an FX preset called Flg+Dly145BPM, which uses a combination algorithm that
has flanging, delay, and a reverb all rolled into one. The 145BPM part refers to the fact that the
delay times are based on a tempo of 145 BPM,
As you play the flute sound, the arrow next to FX2 flashes, and it keeps on flashing as long as the
various feedback delays are sounding. It doesn't flash when you play on the lower part of the
keyboard.
This FX preset uses 2 PAUs. Along with the 1 PAU in use on FXBus 1, this makes 3 of the 4
available PAUs accounted for, so the Free parameter has a value of 1.
Press more>, then FXSEND to see that the output configuration of this FXBus has the signal
going to the Aux bus attenuated by -9.5 dB, and going to the main Mix bus at unity gain.
The other two FXBuses are empty, which you can confirm by pressing the Chan/Bank buttons a
few times.
Inputs
Now let's look at the inputs to the FXBuses. Press <more, followed by the INPUT soft button,
and see this page:
||||||||||||||||||||||||||||||||||||||y
||||qwwwwwwwtqwwwwwwwtqwwwwww†qwwwwwwtÓ||||||| ||||||||||||||||||||||||||||||VVVVVVVV
!k gk
||||CVVVVVVVBCVVVVVVVM<>>>>>>S?VVVVVVB
Input A carries the electric piano, coming from the program's KDFX-A outputs. Play on the
piano part of the keyboard, and the arrow next to A flashes.
jk fO
Basic Effects Mode
A More Complex Studio
||g»||||||
9-27