Free; Moving Files Between Directories - Kurzweil K2661 Musician's Manual

The next disk function you choose will display the current directory with the found
file already highlighted. If a directory was found, then the first file in the directory list
will be highlighted.
Cancel Exit to the Disk-mode page. The current directory is unchanged.
The files are listed in the order that they appear on the disk, unalphabetized. The traversal order
of the directories is the same one that is also used for the Backup function.

Free

The Free utility calculates the amount of free space on the current disk and displays the result on
the Disk Utilities page. This may take a small amount of time to calculate, depending on the
disk.
The parameters tell you the following:
Used The percentage of the disk that is taken up by the existing information stored on it.
Free The amount of disk space available for new files.
Total The size of the disk. This will be the size of the usable partition if MS-DOS format.
For SCSI disks, if the current disk was formatted on a PC or a Mac in MS-DOS format and
contains at least one primary partition, you will see the (DOS) indicator on the top line. Using
this format is described in MS-DOS File System Compatibility on page 13-71.

Moving Files Between Directories

Files and directories can be moved from one directory to another on a given disk. You can either
choose multiple files to move using the Select soft button, or just move the single highlighted
file or directory (if no other files are selected). As you would probably expect, moving a
Disk Mode
Disk Utilities
13-63