Kurzweil K2661 Musician's Manual page 44

User Interface Basics
Renaming Multiple Objects
3. Use the Alpha Wheel or Plus/Minus buttons to highlight objects. When an object whose
4. When you've selected all the objects you want to rename, press OK. The following dialog
5. Use your favorite method to enter a slash (/), followed by the string of characters that you
6. When you've entered the desired string of characters, press OK, and the dialog changes to
7. Press OK. The K2661 asks you if you're sure (unless you have confirmations turned off).
3-8
name you want to change is highlighted, press the Select soft button to select the object.
Note the asterisk that appears between the object's ID and its name.
appears. The name you see is the name of the last object you selected.
want to replace. This function is case-sensitive, so you can enter both capitals and lower-
case characters. In this example, we're going to change "Bad" to "Good."
prompt you to enter the replacement string. Notice that we entered only the characters
B-a-d, and not the entire name of the object. Enter the new string, as shown below.
Press Yes. The NAME page reappears. Every RAM object whose name contained Bad now
contains Good instead.