Kurzweil K2661 Musician's Manual page 200

Basic Effects Mode
Chaining Effects
chain, since you have now maximized your PAU usage. If you'd like to have four effects on the
chain, you'll have to select only effects that use a single PAU. (You'll also have to remove the
empty effects block from FXBus 3 so that it will be available for FXBus 1.) Keep in mind,
however, that you can still send the output of this chain to an effect on the Aux bus, which
allows effects using up to 3 PAUs.
Now let's audition this effects chain: play your keyboard to hear the sound of the 199 Default
Program running through the 3 effects you've chosen in series.
To use this effects chain with any other program, you'll have to save the studio. Press Exit, then
Rename. Enter a name for the studio, then press OK. The save dialog now offers you the next
available studio number; you can save the studio at this location or choose a different one. Press
Save and you are returned to the KDFXMode:MAIN page. Press Exit to return to ProgramMode.
You can now select a program, press Edit, followed by the KDFX soft button (you'll have to
press one of the more soft buttons a few times to bring the KDFX soft button into view), and
select your new studio for the program's effects. Don't forget to check the program's OUTPUT
page to be sure that its output pair is routed to KDFX-A.
9-32