Executing The Ram Macro Table - Kurzweil K2661 Musician's Manual

Disk Mode
Macros
When you press Insert, you will see a dialog displaying the current RAM Macro table:
Scroll the Macro table until the entry before which you want to insert is highlighted. In the
above display, any new macro entries added by this load operation will be inserted in the Macro
table just before the entry for METALIC.K26. That is, the new entry would have index 2, the
index for METALIC.K26 would shift from 2 to 3, and the indices for all the entries after
METALIC.K26 would increase by 1.
Press OK to enable the insert point. Press Cancel to disable the insert point.
The display will return to the Load dialog. If a macro insert point has been set, an indicator will
appear at the top left of the display:
The insert point can be disabled before loading, by pressing Insert again and pressing Cancel
from within the Set Macro Insert Point dialog. The (Macro insert) indicator will disappear.
Similarly, the insert point can be changed before loading by pressing Insert again (the display
will highlight the current insert point,) scrolling to a different insert point, and pressing OK.

Executing the RAM Macro Table

You can load any group of files listed in the RAM Macro table. This is done using the Load soft
button on the MACRO page:
13-56