Soft Buttons On The Event Page - Kurzweil K2000 - GUIDE SUPPLEMENT - VERSION 3 Musician’s Manual Supplement

The values of PCHG, BEND, MPRS, SYSX, TMPO, and END events appear directly to the right
of the Event Type field. These values are all editable. Here are the ranges of values for each event
type:
Program Change (PCHG)
Pitch Bend (BEND)
Mono Pressure (MPRS)
System Exclusive (SYSX)
Tempo (TMPO)
End Point (END)
Note events have four editable values: Note Number, Attack Velocity (
and Note Duration.
Note Number
Attack Velocity
Release Velocity
Note Duration
Controller events have two editable values: Controller Type and Controller Value. Controller
types appear as numerals, except for defined Controllers (like MWheel and Breath).
Controller Type
Controller Value

Soft Buttons on the EVENT Page

Cut
Removes the currently selected event from the event list and temporarily stores it in a memory
buffer so that you can immediately paste it into a new location.
Copy
Makes a duplicate of the currently selected event and temporarily stores it in a memory buffer
so that you can immediately paste it into a new location.
Paste
Inserts the most recent cut or copied event into the event list at the currently selected Bar : Beat :
Tick location. The pasted event shares the same location with the event that already existed at
that location, and appears directly above it.
0 - 127
(-8192) - 8191
0 - 127
The message in hexadecimal form
1.00 - 255.00 bpm
Any Bar : Beat . Tick setting
C -1†through G 9
1–127
1–127
Beats : Ticks
0 - 127
0 - 127
Song Mode and Sequencing
The Song Editor (EditSong Pages)
), Release Velocity (
v
),
^
3-39