Information List; Commissioning Aids - Siemens SIPROTEC 7SC80 Series Manual

Functions
2.14 Additional Functions

2.14.8.4 Information List

No. Information
- Meter res
888 Wp(puls)
889 Wq(puls)
916 WpΔ=
917 WqΔ=
924 WpForward
925 WqForward
928 WpReverse
929 WqReverse
2.14.9

Commissioning Aids

In test mode or during commissioning, the device information transmitted to a central or storage device can be
influenced. There are tools available for testing the system interface (port F) and the binary inputs and outputs
of the device.
Applications
• Test Mode
• Commissioning
Prerequisites
In order to be able to use the commissioning aids described in the following, the device must be connected to
a control center via port F.
172
Type of In-
formation
IntSP_Ev Reset meter
PMV Pulsed Energy Wp (active)
PMV Pulsed Energy Wq (reactive)
- Increment of active energy
- Increment of reactive energy
MVMV Wp Forward
MVMV Wq Forward
MVMV Wp Reverse
MVMV Wq Reverse
Comments
SIPROTEC, 7SC80, Manual
E50417-G1140-C486-A1, Release date 12.2011