Siemens SIPROTEC 7SC80 Series Manual page 186

Functions
2.16 Device Operation
Control and Display Panel
The control and display panel is structured into various function and display areas.
• 32 LEDs to display operating states or indications
• O and C
PEN LOSE
• 6-line field to display operational indications and measured values
• ESC key to cancel entries made in the display panel, scroll keys and E
the text field.
• LEDs Run, Error and Battery to display the operating state of the 7SC80 and the connected external battery
(see also Section 2.1.2, Battery Charger)
• 10 function keys to select functions directly
• N L
key to switch the functions of the function keys. When this key is not pressed, the function keys
UM OCK
work as labeled. When this key is pressed, the function keys can be used to enter digits.
• The R T
ESET ARGETS
• The L PB key locks the other keys.
OCK
The assignment and labeling of the LEDs and function keys corresponds to the allocation made with DIGSI.
For further information, please refer to the system description /1/. The allocation is automatically displayed next
to the LEDs and function keys in the Web Monitor.
The description of the navigation and the setting options in the text field can be found in the System Description
/1/.
186
key to activate/deactivate assigned operational equipment
key resets the LED displays.
key to confirm entries made in
NTER
SIPROTEC, 7SC80, Manual
E50417-G1140-C486-A1, Release date 12.2011