Functions
2.15 Command Processing
Figure 2-48
DIGSI dialog box 'Object properties' for setting the interlocking conditions
With the Web Monitor, configured interlocking causes are output on the device display. They are marked by
letters explained in the following table.
Table 2-15
Command types and corresponding messages
Interlocking Commands
Switching Authority
System interlocking
Zone controlled
SET = ACTUAL (switch direction check)
Protection blocking
Control Logic using CFC
For the bay interlocking a control logic can be structured via the CFC. Via specific release conditions the infor-
mation "released" or "bay interlocked" are available (e.g. object "52 Close" and "52 Open" with the data values:
ON / OFF).
180
Abbrev.
L
S
Z
P
B
SIPROTEC, 7SC80, Manual
E50417-G1140-C486-A1, Release date 12.2011
Display
L
A
Z
P
B