At/Atx Power Mode Setting (J_Atx_At1); Clear Cmos Setup (J_Cmos1); Figure 4-8: At/Atx Power Mode Switch; Figure 4-9: Clear Cmos Button - IEI Technology TANK-XM810 Series User Manual

4.4.1 AT/ATX Power Mode Setting (J_ATX_AT1)

Use the J_ATX_AT1 switch to specify the systems power mode as AT or ATX
PIN NO.
1-2 (Right)
2-3 (Left)

Table 4-25:AT/ATX Power Mode Switch Pinouts

3
1

Figure 4-8: AT/ATX Power Mode Switch

4.4.2 Clear CMOS Setup (J_CMOS1)

To clear the CMOS Setup (for example if you have forgotten the password, you should
clear the CMOS and then reset the password), you should take off the battery(BT1) and
press the button for about 3 seconds. This will set back to normal operation mode.
PIN NO.
NC
Press button

Table 4-26: Clear CMOS Button Pinouts

Figure 4-9: Clear CMOS Button

Page 50
DESCRIPTION
ATX Power Mode (default)
AT Power Mode
DESCRIPTION
Keep CMOS Setup (Normal Operation)
Clear CMOS Setup
TANK-XM810