IEI Technology TANGO-3010 Series User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Industrial PC
  5. TANGO-3010 Series
  6. User manual

IEI Technology TANGO-3010 Series User Manual

Embedded system with intel celeron j6412 processor, lpddr4x, two hdmi 1.4b, three 2.5 gbe lan, rs-232/422/485, usb 3.2 rohs compliant
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL:
TANGO-3010 Series
Embedded System with Intel® Celeron™ J6412 Processor,
LPDDR4X, Two HDMI 1.4b, Three 2.5 GbE LAN, RS-232/422/485, USB 3.2
RoHS Compliant
User Manual
Rev. 1.00 – November 29, 2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TANGO-3010 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IEI Technology TANGO-3010 Series

Summary of Contents for IEI Technology TANGO-3010 Series

  • Page 1 MODEL: TANGO-3010 Series Embedded System with Intel® Celeron™ J6412 Processor, LPDDR4X, Two HDMI 1.4b, Three 2.5 GbE LAN, RS-232/422/485, USB 3.2 RoHS Compliant User Manual Rev. 1.00 – November 29, 2022...
  • Page 2 TANGO-3010 Embedded System Revisions Date Version Changes November 29, 2022 1.00 Initial release Page II...
  • Page 3 TANGO-3010 Embedded System Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4 TANGO-3010 Embedded System Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product. NOTE These messages inform the reader of essential but non-critical information.

  • Page 5: Table Of Contents

    TANGO-3010 Embedded System Table of Contents 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 F ........................3 EATURES 1.3 F ......................3 RONT ANEL 1.4 R ....................... 4 ANEL 1.5 L ....................... 4 ANEL 1.6 T ..................5 ECHNICAL PECIFICATIONS 1.7 P...
  • Page 6 TANGO-3010 Embedded System 3.8.1 Driver Download ..................... 24 4 SYSTEM MOTHERBOARD ..................26 4.1 O ........................ 27 VERVIEW 4.1.1 Layout ......................27 4.2 I ..............29 NTERNAL ERIPHERAL ONNECTORS 4.2.1 Battery Connector (BAT2) ................29 4.2.2 CPU Fan Connector (CPU_FAN1)..............29 4.2.3 System Debug Connector (DBG_PORT1) ............
  • Page 7 TANGO-3010 Embedded System C.1 PEI B ..................... 50 ODES C.2 DXE B ....................50 ODES D HAZARDOUS MATERIALS DISCLOSURE ............51 D.1 R HS II D (2015/863/EU) ............... 52 IRECTIVE D.2 C HS ......................53 HINA Page VII...
  • Page 8 TANGO-3010 Embedded System List of Figures Figure 1-1: TANGO-3010 Series-J6412 ..................2 Figure 1-2: Front Panel ........................3 Figure 1-3: Rear Panel ........................4 Figure 1-4: Physical Dimensions ....................8 Figure 3-5: Remove the Cover .....................15 Figure 3-6: Connect the HDD/SSD and Align with the Bracket ..........16 Figure 3-7: Seat the HDD/SSD to the Bracket ................17...
  • Page 9 TANGO-3010 Embedded System List of Tables Table 1-1: Technical Specifications ....................7 Table 1-2:WLAN/Bluetooth Frequency range and power ....... 错误!未定义书签。 Table 3-1: RJ-45 Ethernet Connector LEDs ................21 Table 3-2: RS-232 (COM1) & RS-232/422/485 (COM2) Connector Pinouts ......22 Table 4-1: Peripheral Interface Connectors ................29 Table 4-2: Battery Connector Pinouts ..................29 Table 4-3: CPU Fan Connector Pinouts ..................29 Table 4-4: System Debug Connector Pinouts ................30...

  • Page 10: Introduction

    TANGO-3010 Embedded System Chapter Introduction Page 1...

  • Page 11: Overview

    USB 3.2 Gen 2 (10Gb/s) ports, two USB 2.0 ports, one RS-232 (3T5R) port and one RS-232/422/485 port. The TANGO-3010 Series has two HDMI 1.4b ports supporting up to 4k@ 30Hz resolution, and includes one M.2 2230 A-key slot and one M.2 2280 M-key slot for expansions.

  • Page 12: Features

    One 2.5" HDD/SSD SATA 6Gb/s bay (supports up to 9.5 mm SSD)  One M.2 A-key and M.2 M-key expansion 1.3 Front Panel The front panel of the TANGO-3010 Series has the following features (See Figure 1-2): Figure 1-2: Front Panel Page 3...

  • Page 13: Rear Panel

    The rear panel of the TANGO-3010 Series is shown below (See Figure 1-3). Figure 1-3: Rear Panel 1.5 Left Side Panel The left side panel of the TANGO-3010 Series is shown below (See Figure 1-3). Figure 1-4: Left Side Panel Page 4...

  • Page 14: Technical Specifications

    TANGO-3010 Embedded System 1.6 Technical Specifications The TANGO-3010 Series technical specifications are listed in Table 1-1, Table 1-2 Specifications Chassis Color Black C & grey (Pantone 430C) Dimensions (WxDxH) (mm) 139 x 137 x 39.8 System Fan Fanless Chassis Construction...
  • Page 15 TANGO-3010 Embedded System TPM 2.0 Intel® PTT Expansions 1 x 2230 A-key (PCIe 1/USB2.0)(preinstalled WIFI Module) 1 x 2280 M-key (PCIe 4) Power Power Input DC jack: 12 V DC Power Consumption +12V@2.95A (Intel® Celeron J6412 with 8GB memory) Reliability Mounting 60.6 x 11.55 With conversion vesa75/100 bracket Operating Temperature...
  • Page 16 TANGO-3010 Embedded System Microsoft® Windows® 10 / Windows® 11 Supported OS Linux Table 1-1: Technical Specifications Technology Frequency range/MHz Max.E.I.R.P/dBm WLAN 2.4GHz 2400-2483.5 WLAN 5GHz 5150-5250 WLAN 5GHz 5250-5350 WLAN 5GHz 5470-5725 WLAN 5GHz 5725-5850 13.98 WLAN 6GHz 5945-6425 Bluetooth BR/EDR 2402-2480 Bluetooth LE 2402-2480...

  • Page 17: Physical Dimensions

    TANGO-3010 Embedded System 3.1 Physical Dimensions The physical dimensions of the TANGO-3010 are shown in Figure 1-4. Figure 1-4: Physical Dimensions Page 8...

  • Page 18: Unpacking

    TANGO-3010 Embedded System Chapter Unpacking Page 9...

  • Page 19: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the TANGO-3010 Series. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the TANGO-3010 Series or any other electrical component is handled, the following anti-static precautions are strictly adhered to.

  • Page 20: Unpacking Checklist

    If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the TANGO-3010 Series from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@ieiworld.com.
  • Page 21 TANGO-3010 Embedded System Quantity Item and Part Number Image Standard Power adapter (P/N: 63040-380060-101-RS ) Screw driver Table 2-1: Packing List Page 12...

  • Page 22: Installation

    TANGO-3010 Embedded System Chapter Installation Page 13...

  • Page 23: Installation Precautions

    Electric shock and personal injury might occur if the rear panel of the TANGO-3010 Series is opened while the power cord is still connected to an electrical outlet.

  • Page 24: Back Cover Removal

    TANGO-3010 Embedded System 5.2 Back Cover Removal Before installing or maintaining the internal components, the back cover must be removed from the TANGO-3010. Follow the steps below to complete the task. Step 1: Turn the TANGO-3010 over and remove the 4 screws on the back cover. Step 1: Take off the back cover (See Figure 5-5).

  • Page 25: Tool-Less Hdd/Ssd Installation

    TANGO-3010 Embedded System 5.3.1 Tool-Less HDD/SSD Installation The TANGO-3010 Series allow installation of one 2.5" HDD/SSD. With mechanical latch lock, no tool is needed for drive installation, allowing quick and easy swapping of drives. The installation procedures are described below.

  • Page 26: Hdd/Ssd Removal

    TANGO-3010 Embedded System Figure 5-7: Seat the HDD/SSD to the Bracket 5.3.2 HDD/SSD Removal You can easily remove the HDD/SSD by the tool in the packing or others like a tweezer or a screwdriver. Follow the steps below to complete the task. Step 1: Locate the two gaps on the inside edge of the back cover, and use a pair of tweezers or a screwdriver to pry up the HDD/SSD...

  • Page 27: Ssd Installation

    TANGO-3010 Embedded System 5.3.3 M.2 SSD Installation The TANGO-3010 Series allows installation of one M.2 2280 M-key card. Follow the steps below to complete the task. Step 1: Locate the M.2 2280 M-key slot. See Figure 6-21. Step 2: Remove the on-board retention screw as shown below (See Figure 5-9).

  • Page 28: Back Cover Installation

    TANGO-3010 Embedded System Step 4: Secure the M.2 module with the previously removed retention screw. Figure 5-11: Securing the M.2 Module 5.4 Back Cover Installation Install the back cover and fasten the 4 screws to secure it (See Figure 5-12). Figure 5-12: Back Cover Installation Page 19...

  • Page 29: External Peripheral Interface Connectors

    Figure 5-13: HDMI Connection 5.5.2 USB Device Connection The TANGO-3010 Series has two USB 3.2 ports and two USB 2.0 ports. To connect a USB device, please follow the instructions below. Step 1: Located the USB connectors. The locations of the USB connectors are shown in Chapter 1.

  • Page 30: Lan Connection

    Chapter 1. Step 5: Align the connectors. Align the RJ-45 connector on the LAN cable with one of the RJ-45 connectors on the TANGO-3010 Series. (See Figure 5-15). Figure 5-15: LAN Connection Step 6: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the on-board RJ-45 connector.

  • Page 31: Rs-232/422/485 Serial Port Connection

    TANGO-3010 Embedded System 5.5.4 RS-232/422/485 Serial Port Connection The system has one RS-232/422/485 port & one RS-232 serial port. The pinouts for the serial ports are listed in the table below (See Table 5-2). PIN NO. RS232 RS422 RS485 DCD# DTR# DSR# RTS#...

  • Page 32: Powering On/Off The System

    TANGO-3010 Embedded System 5.6 Powering On/Off the System WARNING: Make sure a power supply with the correct input voltage is being fed into the system. Incorrect voltages applied to the system may cause damage to the internal electronic components and may also cause injury to the user. ...

  • Page 33: Available Drivers

    TANGO-3010 Embedded System 5.8 Available Drivers All the drivers for the TANGO-3010 Series are available on IEI Resource Download Center (https://download.ieiworld.com). Type TANGO-3010 Series and press Enter to find all the relevant software, utilities, and documentation. Figure 5-20: IEI Resource Download Center 5.8.1 Driver Download...
  • Page 34 TANGO-3010 Embedded System Step 8: Click the driver file name on the page and you will be prompted with the following window. You can download the entire ISO file ( ), or click the small arrow to find an individual driver and click the file name to download ( NOTE: To install software from the downloaded ISO image file in Windows 10 (or later), double-click the ISO file to mount it as a virtual drive to view...

  • Page 35: System Motherboard

    TANGO-3010 Embedded System Chapter System Motherboard Page 26...

  • Page 36: Overview

    TANGO-3010 Embedded System 6.1 Overview This chapter details all the jumpers and connectors of the system motherboard. 6.1.1 Layout The figures below show all the connectors and jumpers of the system motherboard. Figure 6-21: System Motherboard (Solder Side) Page 27...

  • Page 37: Figure 4-22: System Motherboard

    TANGO-3010 Embedded System CPU1 Figure 6-22: System Motherboard Page 28...

  • Page 38: Internal Peripheral Connectors

    TANGO-3010 Embedded System 6.2 Internal Peripheral Connectors The table below shows a list of the internal peripheral interface connectors on the system motherboard. Pinouts of these connectors can be found in the following sections. Connector Type Label Battery Connector 2-pin wafer BAT2 CPU Fan Connector 4-pin wafer...

  • Page 39: System Debug Connector (Dbg_Port1)

    TANGO-3010 Embedded System 6.2.3 System Debug Connector (DBG_PORT1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION EDICS EDIDO EDICLK EDIDI Table 6-4: System Debug Connector Pinouts 6.2.4 EC Debug Connector (EC_DEBUG1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION KSI0 KSO9 KSO0 KSO10 KSO1 KSO12 KSO2 KSI1...

  • Page 40: Sata Connector (Sata0)

    TANGO-3010 Embedded System 6.2.7 SATA Connector (SATA0) PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC1 SATA_RXP0_C SATA_RXN0_C VCC5 VCC4 SATA_TXN0_C VCC3 SATA_TXP0_C VCC2 Table 6-8: SATA Connector Pinouts 6.2.8 AT/ATX Power Mode Switch (J_ATX_AT1) Use the J_ATX_AT1 switch to specify the systems power mode as AT or ATX PIN NO.

  • Page 41: Clear Cmos Button (J_Cmos1)

    TANGO-3010 Embedded System 6.2.10 Clear CMOS Button (J_CMOS1) To clear the CMOS Setup (for example if you have forgotten the password, you should clear the CMOS and then reset the password), you should press the button for about 3 seconds. This will set back to normal operation mode. PIN NO.

  • Page 42: External Interface Panel Connectors

    TANGO-3010 Embedded System 6.3 External Interface Panel Connectors The table below shows a list of the external interface panel connectors on the system motherboard. Pinouts of these connectors can be found in the following sections. Connector Type Label HDMI Connectors HDMI 1.4b HDMI1, HDMI2 LAN 2.5GbE Connectors...

  • Page 43: External 2.5Gbe Lan Connectors (Lan1, Lan2, Lan3)

    TANGO-3010 Embedded System Figure 6-23: HDMI Connector 6.3.2 External 2.5GbE LAN Connectors (LAN1, LAN2, LAN3) PIN NO. DESCRIPTION PIN NO. DESCRIPTION MDIA3- MDIA1+ MDIA3+ MDIA2+ MDIA2- MDIA0- MDIA1- MDIA0+ Table 6-15: LAN Connectors Pinouts Figure 6-24: LAN Connectors LED. DESCRIPTION PIN NO.

  • Page 44: External Rs-232/422/485 Serial Port Connector (Com1)

    TANGO-3010 Embedded System 6.3.3 External RS-232/422/485 Serial Port Connector (COM1) Mode RS-232 RS-422 RS-485 PIN NO. DESCRIPTION DESCRIPTION DESCRIPTION DCD# DTR# DSR# RTS# CTS# Table 6-17: RS-232/422/485 Serial Port Connector Pinouts Figure 6-25: RS-232/422/485 Serial Port Connectors 6.3.4 External RS-232 Serial Port Connector (COM2) PIN NO.

  • Page 45: External Usb 3.2 Gen 2 Connectors (Usb1, Usb2)

    TANGO-3010 Embedded System 6.3.5 External USB 3.2 Gen 2 Connectors (USB1, USB2) DESCRIPTION DESCRIPTION USB_DATA0- USB_DATA1- USB_DATA0+ USB_ DATA1+ USB3_RX0- USB3_RX1- USB3_RX0+ USB3_ RX1+ USB3_TX0- USB3_TX1- USB3_TX0+ USB3_TX1+ Table 6-19: USB 3.2 Gen 2 Connectors Pinouts Figure 6-26: USB 3.2 Gen 2 Port Location 6.3.6 External USB 2.0 Type-A Connectors (USB3, USB4) PIN NO.

  • Page 46: A Regulatory Compliance

    TANGO-3010 Embedded System Appendix Regulatory Compliance Page 37...
  • Page 47 TANGO-3010 Embedded System DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives:  EMC Directive (2004/108/EC, 2014/30/EU)  Low-Voltage Directive (2006/95/EC, 2014/35/EU)  RoHS II Directive (2011/65/EU, 2015/863/EU) If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
  • Page 48 TANGO-3010 Embedded System Eesti [Estonian] IEI Integration Corp deklareerib seadme seadme vastavust direktiivi 2014/53/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU. Ελληνική...
  • Page 49 TANGO-3010 Embedded System Magyar [Hungarian] IEI Integration Corp nyilatkozom, hogy a berendezés megfelel a vonatkozó alapvetõ követelményeknek és az 2014/53/EU irányelv egyéb elõí rásainak. Polski [Polish] IEI Integration Corp oświadcza, że wyrobu jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 2014/53/EU. Português [Portuguese] IEI Integration Corp declara que este equipamento está...
  • Page 50 TANGO-3010 Embedded System FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  This device may not cause harmful interference  This device must accept any interference received, including interference that may cause undesired operation.
  • Page 51 TANGO-3010 Embedded System FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  This device may not cause harmful interference  This device must accept any interference received, including interference that may cause undesired operation.
  • Page 52 TANGO-3010 Embedded System 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any company of the host device which install this modular with limit modular approval should perform the test of radiated emissionand spurious emission according to FCC part 15C : 15.247 and 15.209 requirement,Only if the test result comply with FCC part 15C :...

  • Page 53: B Safety Precautions

    TANGO-3010 Embedded System Appendix Safety Precautions Page 44...

  • Page 54: Safety Precautions

    WARNING: The precautions outlined in this appendix should be strictly followed. Failure to follow these precautions may result in permanent damage to the TANGO-3010 Series. Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.

  • Page 55: Anti-Static Precautions

    TANGO-3010 Series and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the TANGO-3010 Series. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the TANGO-3010 Series is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.

  • Page 56: Product Disposal

    The mark on electrical and electronic products only applies to the current European Union Member States. Please follow the national guidelines for electrical and electronic product disposal. B.2 Maintenance and Cleaning Precautions When maintaining or cleaning the TANGO-3010 Series, please follow the guidelines below. Page 47...

  • Page 57: Maintenance And Cleaning

    Some components in the TANGO-3010 Series may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the TANGO-3010 Series. ...

  • Page 58: C Error Beep Code

    TANGO-3010 Embedded System Appendix Error Beep Code Page 49...

  • Page 59: Pei Beep Codes

    TANGO-3010 Embedded System C.1 PEI Beep Codes Number of Beeps Description Memory not Installed Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found DXE Core Firmware Volume was not found Recovery failed S3 Resume failed Reset PPI is not available C.2 DXE Beep Codes...

  • Page 60: D Hazardous Materials Disclosure

    TANGO-3010 Embedded System Appendix Hazardous Materials Disclosure Page 51...

  • Page 61: Rohs Ii Directive (2015/863/Eu)

    TANGO-3010 Embedded System D.1 RoHS II Directive (2015/863/EU) The details provided in this appendix are to ensure that the product is compliant with the RoHS II Directive (2015/863/EU). The table below acknowledges the presences of small quantities of certain substances in the product, and is applicable to RoHS II Directive (2015/863/EU).

  • Page 62: China Rohs

    TANGO-3010 Embedded System D.2 China RoHS 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的年 限。本产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些元件将 会单独标示出来。 部件名称 有毒有害物质或元素 壳体 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求。 Page 53...

This manual is also suitable for:

Tango-3010-jwc-r10

Table of Contents