IEI Technology TANK-XM810 Series User Manual page 93

TANK-XM810

None

Even

Odd

Mark

Space
 Stop Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.

1

2
No parity bit is sent with the data bits.
D
EFAULT
The parity bit is 0 if the number of ones in the data
bits is even.
The parity bit is 0 if the number of ones in the data
bits is odd.
The parity bit is always 1. This option does not allow
for error detection.
The parity bit is always 0. T This option does not
allow for error detection.
D Sets the number of stop bits at 1.
EFAULT
Sets the number of stop bits at 2.
Page 81