Atx Power Mode; Mounting The System; Wall Mounting - IEI Technology AFL3-W15C-ADLP User Manual

3.8.2 ATX Power Mode

With the ATX mode selected, the AFL3-W15C/W19C/W22C-ADLP panel PC goes in a
standby mode when it is turned off. The panel PC can be easily turned on via network or a
power switch in standby mode.
applications since the broadcasting time for each panel PC can be set individually and
controlled remotely. Other possible application includes
 Security surveillance
 Point-of-Sale (POS)
 Advertising terminal

3.9 Mounting the System

The methods of mounting the AFL3-W15C/W19C/W22C-ADLP are listed below.


Wall mounting

 Panel mounting
 Rack mounting
 Arm mounting
 Stand mounting
The mounting methods are described below.
3.9.1 Wall Mounting
To mount the flat bezel panel PC onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Page 32
AFL3-W15C/W19C/W22C-ADLP
Remote power control is perfect for advertising