Sata Connector (Sata0); At/Atx Power Mode Switch (J_Atx_At1); Bios Programming Connector (Jbios1) - IEI Technology TANGO-3010 Series User Manual

TANGO-3010 Embedded System

6.2.7 SATA Connector (SATA0)

PIN NO. DESCRIPTION
1 GND
2
GND
3
GND
4
GND
5
GND
6 NC3
7 VCC5
8 VCC4
9 VCC3
10 VCC2
Table 6-8: SATA Connector Pinouts

6.2.8 AT/ATX Power Mode Switch (J_ATX_AT1)

Use the J_ATX_AT1 switch to specify the systems power mode as AT or ATX
PIN NO.
A-B (Right)
B-C (Left)
Table 6-9: AT/ATX Power Mode Switch Pinouts

6.2.9 BIOS Programming Connector (JBIOS1)

PIN NO. DESCRIPTION
1 +V3.3M_SPI_CON
3 SPI_SO_N
5 SPI_SI_N
Table 6-10: BIOS Programming Connector Pinouts
PIN NO. DESCRIPTION
11 VCC1
12 NC2
13 NC1
14 GND
15 SATA_RXP0_C
16 SATA_RXN0_C
17 GND
18 SATA_TXN0_C
19 SATA_TXP0_C
20 GND
DESCRIPTION
ATX Power Mode (default)
AT Power Mode
PIN NO. DESCRIPTION
2 SPI_CS#0_N
4 SPI_CLK_N
6 GND
Page 31