Parking Of This Machine - Kubota XN12-8 Operation Manual

Operations

Parking of This Machine

Parking of This Machine
Parking
● Stop the machine on a level, solid, and
safe ground. Set the parking device.
Digging
● If it's necessary to park the machine or
tilt the machine on a slope, securely
park the machine and block the
machine against movement.
● While parking the machine in a street,
use gratings, warning signs, or lamps to
keep the visible even in the night, in
order to prevent the impact with other
Warning
Stopper
vehicles.
● Before leaving the seat, lift up the safety
lock handle to the locking position and
stop the engine. Meanwhile, ensure to
withdraw the key, close the doors and
hoods, and carry the key with you and
then preserve it in a designated place.
1. Place the left and right traveling joysticks
to neutral positions.
2. Push backward the accelerator joystick to
idle the engine.
3. Lower the bucket and bulldozing blade
onto the ground.
4. Lift up the safety lock handle to the
locking position.
For details, please refer to "Stopping the
Engine" on page 3-6.
Checking after Stop of Engine
1. Check for leakage of oil and water and
check the working device, cover, and
under frame. U p on detection o f a n y
abnormality, repair.
2. Fully fill fuel.
Refer to page 5-21 "Checking of fuel
level".
3. Remove paper fragments and dusts from
engine compartment.
4. Remove the mud from under frame.
3-26