Kubota XN12-8 Operation Manual page 148

Maintenance
As necessary
Installation
1. Lift the machine body by working device.
2. Place rubber track on the sprocket.
3. Place a steel tube (1) in the rubber track
and rotate the sprocket slowly towards
opposite direction.
4. Rotate the sprocket till the steel tube (1)
closes to the pensioner and the rubber track
is lifted off the pensioner and then stop the
rotation of sprocket.
5. Slide inward the rubber track to install it
onto the pensioner and then pull out the
steel tube.
6. Check rubber track for secure installation
on sprocket and pensioner.
7. Tension the rubber track to standard
tension.
Refer to the "Checking and adjustment of
track tension" in page 5-26 for details.
8. Install the other rubber track by same
procedure.
5-47