Kubota XN12-8 Operation Manual page 155

Troubleshooting
No Battery Power
(B) to the engine support of the
malfunctioned machine. Connect the
clamp to a point as far as possible from the
battery.
After Start of Engine
1. Check and ensure that the wire clamps are
already connected securely to various
terminals.
2. Start the engine of rescue machine and run
it at high speed.
3. Start the engine of the malfunctioned
machine.
Disconnection of Jumper Cable
After the successful start of the engine of
malfunctioned machine, disconnect the jumper
cable in reverse sequence of the connection
procedure.
Battery of rescue
machine
1. Disconnect the clamp of jumper cable (B)
from the engine support of malfunctioned
machine.
2. Disconnect the other jumper cable (B)
Battery of malfunctioned
machine
To engine block
from the charger (-).
3. Disconnect the jumper cable (R) clamp
from the charger (+).
4. Disconnect the jumper cable clamp (R)
from the uncharged machine (+).
Recharging
Please ask your sales or service dealer to
recharge the depleted battery.
6-5