General Safety Measures - Kubota XN12-8 Operation Manual

Optional Products

General Safety Measures

General Safety Measures
Safety Measures
Please take the following safety measures
while disassembling or installing
attachments.
● Please consult with Ken stone Heavy
Machinery before installing optional
products.
● Do not use any attachment not
approved by Ken stone Heavy
Machinery. Otherwise it will probably
cause safety issues or cause adverse
influence on operations or life of
machine.
● Ken stone Heavy Machinery will not be
liable for any injury, accident, or
product damage arising from the use of
non-approved attachments.
● Select a stable and level working zone.
Ensure to park the machine in a well-
ventilated place.
● Remove obstacles and dangerous
objects and immediately clear any
splashed fuel.
● During lifting, ensure to assign one
person as signaler. For detailed
procedure and measures, please follow
the instructions of the signaler.
Warning
● If it's necessary to place temporarily
heavy weights or accessories onto the
ground during disassembling or
installation, please ensure to place them
in a steady place.
● During lifting, keep all personnel away
from working zone. There is probably a
danger of object falling or contact with
personnel in the working zone.
● Use a crane to move heavy weights
(≥25kg).
● Ensure to properly support the heavy
weights before movement. While lifting
a load by a crane, notice the gravity
center of the load and keep balance the
machine.
● Do not operate the machine when a load
is lifted by a crane.
● Follow the correct procedures to install
boom and bucket arm, otherwise it will
probably result in serious injuries. If the
help is needed, please consult with your
sales or service dealer.
Precautions for Installation of
Working Device
Ensure to fulfill commissioning after the
replacement with optional product or other
special attachment. Check the hydraulic oil
level and if necessary add oil. For detailed
8-2