Kubota XN12-8 Operation Manual page 12

Safety
General Precautions
No Disassembling of Safety Devices
● Please ensure that all guardrails, shelters,
and doors are installed properly and
securely. Before operating the machine,
please repair or replace damaged parts.
● Know how to use safety lock handle, seat
belt, and other safety devices and
understand the correct operation methods.
● Do not disassemble any safety device,
unless for the purpose of checking and
repair. Always keep all safety devices
under good working condition.
Setup of Signaler and Flagman
Learn how to use the gestures of specific
operation needs and designate the person
responsible for making gestures.
● All personnel must completely understand
all gestures.
● The operator must respond to the gestures
of designated person only. However, the
operator must abide by the stop gesture
made by anyone in all cases.
● The signaler must stand in a clearly visible
place while making the gestures.
Precautions for Standing up from or Leaving
Driver Seat
● Before standing up from the driver seat to
open/close windows or disassemble/install
the lower window, lower the working
device onto the ground, lift up and lock the
safety lock handle, and stop the engine.
When the safety lock handle is lowered
down (Unlocked), the accidental touch of
any joystick will result in sudden
movement of machine and cause serious
injuries or deaths.
1-4