Kubota XN12-8 Operation Manual page 88

Operations
Operating Procedures
Ditching
Install a bucket suitable for digging of ditches,
adjust the tracks to be parallel with the ditch to
be dug, in order to improve the working
efficiency. While digging a wide ditch, dig the
side faces and then the middle area.
Digging of Side Drainage Ditch
As shown in the diagram, dig the side ditch by
swing function of boom.
Loading
While loading soil into the cargo body of a
truck, loading from the rear end of truck can
load more soil easier than loading from the
front end. In addition, the small angle slewing
can be used to improve the efficiency.
Leveling
1. Close the bucket working device to the
machine body.
2. Slowly push away the soil from the side
face of soil pile.
3. If the soil pile is low, push the soil from
the top. If the load is too heavy for the
machine body, lift or lower the bulldozing
blade for adjustment.
3-25