Kubota XN12-8 Operation Manual page 175

Optional Products
Hydraulic Breaking Hammer
Precautions for Operations
Start the engine and run at 75% of
l
maximum speed.
Perform the crushing operation by placing
l
the hammer head perpendicular to the
working face.
During the crushing operations,
l
appropriately aim the hammer head at the
object to be crushed and avoid the air
impact.
l Do not pry by hammer head or pry during
breaking.
l Do not move the hammer head during
crushing.
l Do not impact one same surface
continuously for >30s.
Do not crush when the cylinder is fully
l
extended or retracted (at travel end).
Reserve at least 50mm travel.
8-7