Table of Contents
Advertisement
Introduction
Notes about Reading of This
Manual
Please be noted that the descriptions and
graphics contained in this manual probably are
not applicable for your machine in use. The
numbers in graphics are marked by circles. The
same numbers in the descriptions are marked in
parentheses. (For instance: ①→(1))
Signs used in this manual
The meanings of the signs used in this manual
are as below.
,
.... Prohibition
....... Lock
......Unlock
Noise and vibration
A-Weighted emission sound pressure level at
the operator's position measured according to
work cycle procedures specified in "ISO
6396 " is 78dB(A), The hands and arms are
exposed to a weighted root mean square
acceleration that is less than 2.5 m/s2.
The body is exposed to a weighted root mean
square acceleration that is less than 0.5 m/s2.
Measurements are obtained on a
representative machine using the procedures
in the following
standards: ''ISO 2631-1" ''ISO 5349-1" ''ISO
5349-2"
0-4
Advertisement
Chapters
Table of Contents
