Kubota XN12-8 Operation Manual page 98

Transportation
Loading and Unloading
3. Align the center of truck cargo body with
the center of machine and align the center
of ramps with center of tracks.
4. Ensure that the bulldozing blade will not
touch the ramps.
5. Lower the bucket working device as low
as possible and take cautions not to impact
it with the transport truck.
6. Reduce engine speed.
7. According to the signaler's signals, drive
the machine straightly up or down along
the ramps in 1st gear (low speed).
8. Load the machine to designated position of
transport truck. Refer to "Transport Status"
in page 4-6 for details.
4-3