Personal Number - Mitel MiVoice 4425 IP Vision User Manual

6.6
6.6.1
6.6.2
6.6.2.1
6/1553-ANF 901 54 Uen S2 2016-03-08

PERSONAL NUMBER

It is recommended to use Mitel BluStar Web to setup up personal number profiles. This
section describes the handling of the personal number feature when dialing procedures
from your own telephone.
GENERAL
Each personal number can have up to five profiles with the names Profile 1, Profile 2,
Profile 3, Profile 4 and Profile 5. It is not possible to change the names of the profiles.
You can activate or deactivate profiles by dialing a procedure. This can be done from
your own telephone assigned to the personal number (PN).
Alternatively the activation/deactivation can be done from the Mitel BluStar Web.
No matter which method is used, the current active profile is shown in the display of
your own telephone. If no profile is active, the display shows the normal idle state.
PROCEDURES
PN indicates the personal number of the extension with the facility available. In most
cases the personal number is the same number as your directory number.
Please contact your system administrator in order to change the contents of the profile,
or use Mitel BluStar Web.
From Your Own Telephone
The recommended value of the function code is 10, but other values can be used.
6.6.2.1.1
Dial *10* Profile#
To change the active profile, the same procedure is used with the new profile number.
6.6.2.1.2
Dial #10#
Activation
Deactivation
C F
ALL ORWARDING
72