Mitel MiVoice 4425 IP Vision User Manual page 9

M V 4425 IP V (DBC 425) M V MX-ONE
I OICE ISION FOR I OICE
Figure 4:
After the user identity has been entered and Log on (F4) has been selected, the user
must also enter the password and press Log on (F4), see 2.7 Logging On the Tele-
phone on page 13.
If the log on is accepted the telephone will proceed with the normal start up sequence.
If the log on fails, the following menu will be shown for a few seconds and then the tele-
phone will show the log on menu again:
Figure 5:
After submitting the password a second time (after failing the first log on), there may be
a delay for up to one minute.
2.6.2 START THE TELEPHONE, NORMAL CASE
Normal Case means that new software is not loaded into the telephone.
The telephone display shows the following:
9 6/1553-ANF 901 54 Uen S2 2016-03-08