Mitel MiVoice 4425 IP Vision User Manual page 51

M V 4425 IP V
I OICE ISION
4.13.2
4.13.2.1
51
(DBC 425) M V
FOR I OICE
This is a code that does not have to be affiliated to any directory number in the
system. The authorization code can however be limited to one telephone. The
authorization code cannot be changed by the user.
The common authorization code provides two different functions:
– Locking/unlocking of an extension. When locked a lower common cate-
gory code or common service profile is used.
– Authorization code dialing. This enables the calling party to use other cate-
gories or service profiles than those the extension is programmed with.
• Individual authorization code
This is a code that is always affiliated to a directory number in the system.
The individual authorization code provides three different functions:
– Locking/unlocking of an extension. When locked a lower common service
profile is used.
– Authorization code dialing. This enables the calling party to use other cate-
gories or service profiles than those the extension is programmed with.
– Changing the authorization code from the phone. This enables the autho-
rization code user to change the code when suitable.
Using Last Number Re-dial (LNR) on external calls after dialing with common/individual
authorization code:
• An unlocked extension is allowed to use LNR without a call discrimination
check.
• A locked extension is allowed to use LNR together with a call discrimination
check.
PROCEDURE
Dialing from an Extension with a Common Authorization Code
A specific procedure dialed from the extension must be used when making an authori-
zation code call:
1) Dial *72* authorization code#, where 72 is the standard function code for
common authorization code dialing.
2) A verification tone is received.
3) Continue with the external number.
The authorization code call will only be accepted if the authorization code is valid.
The common service profile associated with the authorization code will be used for the
call, except if the authorization code cannot be verified, then the default common
service profile will be used instead.
If the category/common service profile of the authorization code is too low for dialed
external number, the call is rejected.
MX-ONE
6/1553-ANF 901 54 Uen S2 2016-03-08