Mitel MiVoice 4425 IP Vision User Manual page 85

M V 4425 IP V (DBC 425) M V MX-ONE
I OICE ISION FOR I OICE
Figure 69:
The extension number of the telephone that is monitored is shown together with the
current type of ring signal for the key. To change the current type of ring signal, press
the Change (F3) key and the following menu appears:
Figure 70:
Select the wanted type of ring signal by pressing the Select (F4) key.
10.6 PROGRAMMING THE CHARACTER OF THE RING SIGNAL
Ring signals are generated in the telephone loudspeaker by a tone ringer. The selec-
tion of one of ten different ringing characters can be made in the settings mode. Each
ringing character corresponds to a digit between 0 to 9. The following procedure is
used:
Use the navigation keys to get to the Settings menu and select the Ring Character
menu:
85 6/1553-ANF 901 54 Uen S2 2016-03-08