Mitel MiVoice 4425 IP Vision User Manual page 8

2.6
2.6.1
6/1553-ANF 901 54 Uen S2 2016-03-08
Figure 3: Connecting the telephone
If a headset will be used, connect it according to Figure 3.
If your PC will use the same LAN outlet as your telephone, connect the PC as shown
in Figure 3.
Note: When the telephone is starting, a connected PC will loose the LAN connection
for approximately 10 seconds.
STARTING THE TELEPHONE
Make sure that the telephone is connected to the IP network (LAN).
DBC 425 01
After connecting the power, the headset lamp of the DBC 425 01 is lit after around 5
seconds. After another 5 seconds the headset lamp is switched off.
DBC 425 02
After connecting the power, the mute lamp of the DBC 425 01 is lit after around 5
seconds. After another 10 seconds the headset lamp is switched off.
LAN AUTHENTICATION (ONLY FOR DBC 425 02)
The telephone conforms to the 802.1x standard for LAN authentication. If this function
is implemented on the LAN, the telephone must be authenticated before it can be used.
The user must enter a valid user identity and password to gain access to the LAN, see
the following figure:
T DBC 425
ELEPHONE
8