Hot-Line (Non-Dialed Connection); Least Cost Routing - Mitel MiVoice 4425 IP Vision User Manual

Table of Contents

Advertisement

9.8
9.8.1
9.8.2
9.9
9.9.1
9.9.2
9.10
9.10.1
6/1553-ANF 901 54 Uen S2 2016-03-08

HOT-LINE (NON-DIALED CONNECTION)

DIRECT HOT-LINE
An extension number can be defined as a direct hot-line. When the handset on the tele-
phone is lifted or line-key is pressed, a call is automatically generated to a predefined
extension position or external subscriber. The only call that can be placed from this
type of line is the direct hot-line call.
DELAYED HOT-LINE
Note: Not applicable.
INDIVIDUAL DO NOT DISTURB (DND)
You can activate this feature when you want to avoid incoming calls to your telephone.
The calling party receives a number unobtainable tone or a busy tone or will be
forwarded to the diversion position if it is defined by the system administrator.
TO ORDER DO NOT DISTURB
1)
Lift the handset (dial tone).
2)
Dial *27#
3)
Replace the handset.
4)
A text in the display reminds you that DND is activated.
The telephone can still be used for outgoing calls as usual.
TO CANCEL DO NOT DISTURB
1)
Lift the handset (special dial tone).
2)
Dial #27#. Dial tone

LEAST COST ROUTING

GENERAL
The Least Cost Routing (LCR) function can be accessed by dialing the Least Cost
Routing Access Code (LAC).
By using LAC you will automatically be routed over the cheapest available route. You
cannot choose the cheapest route yourself, this is performed automatically by LCR.
O
F
THER
EATURES
78

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbc 42

Table of Contents