Mitel MiVoice 4425 IP Vision User Manual page 66

Table of Contents

Advertisement

6.2.4
6.2.5
6.2.6
6/1553-ANF 901 54 Uen S2 2016-03-08
3)
Enter your own extension number.
4)
Press the OK (F4) key. The Follow-me lamp is turned on.
Using a procedure
1)
Lift the handset (dial tone).
2)
Dial *21* own extension number # . The Follow-me lamp and special dial tone
are turned on.
3)
Replace the handset.
The follow-me key is used for indication if Follow-me is activated.
To order follow-me from another telephone:
Using the Absence soft key
1)
Press Absence (F2).
2)
Select the Follow-me menu.
3)
Enter your own extension number*the extension number of the new answering
position.
4)
Press the OK (F4) key.
Using a procedure
1)
Lift the handset (dial tone).
2)
Dial *21* own extension number * the extension number of the new answering
position# (special dial tone).
3)
Replace the handset.
CANCELING FOLLOW-ME FROM ANOTHER PHONE
1)
Lift the handset (dial tone).
2)
Dial #21* own extension number# (dial tone).
3)
Replace the handset.
ORDERING FOLLOW-ME REMOTELY
With this feature you can order follow-me of any extension number from any telephone.
The prerequisite is that all the involved telephones have the right service profile.
To order remote programming of follow-me, do the following:
1.
Lift the handset and wait for dial tone.
2.
Dial *21*extension number to divert * extension number of the new answering
position#.
3.
Wait for special dial tone.
4.
Replace the handset.
CANCELING FOLLOW-ME REMOTELY
To cancel remote programming of follow-me from another telephone than the tele-
phone with the diverted number:
C
F
ALL
ORWARDING
66

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbc 42

Table of Contents