Mitel MiVoice 4425 IP Vision User Manual page 13

M V 4425 IP V
I OICE ISION
2.7
13
(DBC 425) M V
FOR I OICE
Figure 13:
It is important that you do not disconnect the power to the telephone while this text is
shown in the display. This takes about 1/2 minute. If there is a power failure during this
phase, the telephone has to load the software once more.
After the software has been saved the telephone is ready for registration in the system,
see 2.7 Logging On the Telephone on page 13 .
LOGGING ON THE TELEPHONE
The following options exist:
• The end-user is allowed to log on and log off the telephone. This is the most
common option, see 2.7.1 End-user is Allowed to Log on and Log off on page 14.
• The telephone is always logged on with a default number. The end-user cannot
log on or off. This option can be used for telephones in conference rooms, recep-
tions and so on, see 2.7.2 Telephone is Always Logged On on page 15.
• The telephone is always logged on, with a default number, as in option 2 but you
as an end-user can log on your individual number and get your personal catego-
ries. This option can be used in a free seating environment, see 2.7.3 Logging
on with an Individual number on page 15.
MX-ONE
6/1553-ANF 901 54 Uen S2 2016-03-08