Table of Contents
Advertisement
5.3.2
5.3.3
5.3.4
5.4
6/1553-ANF 901 54 Uen S2 2016-03-08
4)
Press the Conference key (F3).
During the conference, conference tone will be heard.
ADDING A NEW PARTY IN A CONFERENCE
To add a new party in a conference, do the following:
1)
Press the Conf/Transf key (F4), the Inquiry key or any idle Line key (Line 1 or
2).
2)
Dial the new party's extension number (inform about the conference).
3)
Press the Conference (F3 key).
INTERNAL CONSULTING DURING A CONFERENCE
As a conference leader you can make an Inquiry call to one of the conference
members.
Doing this you will get busy tone and to reach him/her you must use the Intrusion proce-
dure, see 5.6 Intrusion on page 57 .
1)
Press the Inquiry key (dial tone).
2)
Dial the extension number (busy tone).
3)
Press the Intrusion (F4) key.
You will now be connected with this conference member outside the conference for
consultation. You can also release him/her from the conference.
Return to a conference by performing the following:
1)
Return to the conference together with the consulted conference member - press
the Conference (F3) key.
2)
Refer back to conference - you will return to the conference and the consulted
conference member will be disconnected from the conference.
3)
Clear the call and then refer back - the consulted conference member will be
disconnected from the conference.
4)
Make an Inquiry call - the consulted conference member will be disconnected
from the conference.
LEAVING A CONFERENCE
To leave a conference, replace the handset.
Note: A tone burst is heard each time a participant enters or leaves the conference.
The conversation is changed back to a normal two party connection when there
is only two parties left. When the conference leader leaves the conference the
conference will continue and the first one to park the conference will be the new
conference leader.
STORING CUSTOMER IDENTITY USING FEATURE CODE
This function allows a customer identity (CID) to be associated to an external caller by
dialing a feature code when an external call is connected to the extension.
D
C
URING
ALLS
56
Advertisement
Table of Contents
